Fire Suppression System

The INERGEN Fire Suppression System, manufactured by ANSUL, is an  engineered system utilizing a fixed nozzle agent distribution network. The system is designed and installed in accordance with the National Fire Protection Association (NFPA)  Standard 2001, Clean Agent Fire Extinguishing Systems When properly designed, the INERGEN system will extinguish surface burning fire in Class A, B, and C hazards by lowering the oxygen content below the level that supports combustion. 

INERGEN agent has also been tested by FMRC for inserting capabilities. Those tests have shown that INERGEN agent, at design concentrations between 40% and 50%, has successfully inserted mixtures of propane/air, and methane/air. The system can be actuated by detection and control equipment for automatic system operation along with providing local and remote manual operation as needed. Accessories are used to provide alarms, ventilation control, door closures, or other auxiliary shutdown or functions

When INERGEN agent is discharged into a room, it introduces the proper mixture of gases that will allow a person to breathe in a reduced oxygen atmosphere. A system installation and maintenance manual is available containing information on system components and procedures concerning design, operation, inspection, maintenance, and recharge.

When INERGEN agent is discharged into a room, it introduces the proper mixture of gases that will allow a person to breathe in a reduced oxygen atmosphere. A system installation and maintenance manual is available containing information on system components and procedures concerning design, operation, inspection, maintenance, and recharge.

APPLICATION THAT BENEFIT FROM INERGEN SUPPRESSION SYSTEMS

AUTOMATED TAPE STORAGE LIBRARIES

COMPUTER AND DATA PROCESSING FACILITIES

CULTURAL AND HISTORICAL SITES

HOSPITAL AND MAJOR MEDICAL FACILITIES

MARINE/OFFSHORE/NAVAL

MUSEUMS AND ART GALLERIES

POWER GENERATION FACILITIES

TELECOMMUNICATION FACILITIES

.